NOTICE
The BMW Motorrad Race ABS
function can also be deactivated
while driving.
Press and hold the 1 button
until first the ASC / DTC indi-
cator light 3 and then the ABS
indicator and warning light 2
change their display behavior.
The ASC/DTC setting remains
unchanged.
ABS indicator light lights
up.
Release button 1 within two
seconds.
ABS indicator light contin-
ues to be lit up.
ABS is deactivated.
Activating ABS
Press and hold the 1 button
until first the ASC / DTC indi-
cator light 3 and then the ABS
indicator and warning light 2
change their display behavior.
The ASC/DTC setting remains
unchanged.
ABS indicator light goes
out, and starts to flash if
self-diagnosis has not been com-
pleted.
If the coding plug for the
SLICK
USER
/
riding mode is
not installed, the ignition can
also be switched off and then
on again as an alternative.
If the ABS indicator light
lights up after switch-
ing the ignition off and on and
then continuing to ride above
the minimum speed, an ABS
fault has occurred.
min 6 mph (min 10 km/h)
Automatic Stability
Control
Deactivating ASC
Switch on the ignition.
4
51
z