Working; Inspecting Cutting Blade; Adjusting Cutting Height - CanyCom CMX 227 Operator's Manual

4

Working

Inspecting Cutting Blade

Inspect cutting blade before work. Refer to Cutting Blades (page 65) for inspection
procedure.

Adjusting Cutting Height

Cutting Height Adjust Lever
Cutting Height Lock
5335M-0403-010E
Cutting Height Adjust Lever
5332M-0403-020E
NOTE
• Cutting Height Range: 0mm - 150mm (CMX227, CM226)
• Cutting Height indicated on the side of the adjust lever is for reference purpose
only; actual cutting height may vary due to the condition of ground or brush, and
other factors.
Operation
1. Grab cutting height lock to unlock cutting height
adjust lever.
2.
3.
0mm - 130mm (CMX186, CM185)
-34-
With lock button pulled up, move cutting
height adjust lever to a desired position.
Release lock to lock cutting height adjust
lever.