Working; Inspecting Cutting Blade; Adjusting Cutting Height - CanyCom MASAO CMX227 Operator's Manual

Working

Inspecting Cutting Blade

Inspect the cutting blades before work. Refer to Cutting Blades (page 71) for the inspection
procedure.

Adjusting Cutting Height

Cutting Height Adjust Lever
Cutting Height Lock
5347M-0403-010E
Cutting Height Adjust Lever
5347M-0403-020E
CMX227H CM226
GL
5347M-5351-0403-100
Operation
1. Grab the cutting height lock to unlock the
cutting height adjust lever.
2.
3.
NOTE
• Cutting Height Range:
0mm - 150mm
135
Stationary
150
Running
• The cutting Height indicated on the side
of the cutting height adjust lever is for
reference purpose only; actual cutting
height may vary due to the condition of the
ground or brush and other factors.
-39-
With the cutting height lock pulled up, move
the cutting height adjust lever to a desired
position.
Release cutting height lock to lock the cutting
height adjust lever.
(CMX227, CM226)
4