Drive Train; Tires - CanyCom CMX 227 Operator's Manual

Drive Train

• Stop engine and remove ignition key when servicing drive train.
• Allow machine to cool off before servicing. Engine and its ancillaries are very
hot after operation and may pose a burn hazard.
• Dispose of drained oil properly.

Tires

• Inflate tires to the specified pressure. Under- or over-inflation causes uneven
wear or other damages to tires.
CMX227 / CM226
Front Wheel
Rear Wheel
CMX186 / CM185
Front Wheel
Rear Wheel
5332M-0507-010E
Maintenance
Tire Size
AGR 4.00-7 (2PR)
17×8.00-8 (4PR)
AGR 3.50-7 (2PR)
16×7.00-8 (2PR)
1.
2.
Valve Cap
3.
4.
Pressure KPa(kgf/cm
Park machine on a level ground.
Remove valve cap.
Check tire air pressure. If different from the
specified values, adjust pressure.
Put valve cap back in place.
-59-
)
2
120 (1.2)
240 (2.4)
110 (1.1)
110 (1.1)
5