CanyCom CMX 227 Operator's Manual page 90

Area Malfunction
Machine does not
move when drive lever
or pedal is operated.
Machine moves when
drive lever or pedal is
in neutral position.
Transmission jumps
Drive Train
out of gear.
Machine does not turn
smoothly.
Machine does not run
straight.
Brake or parking brake
does not work well, or
Brake
machine pulls to one
side when braked.
Machine vibrates
Chassis
abnormally.
Troubleshooting
Possible Cause
Insufficient or
deteriorated HST fluid.
Parking brake is
applied
V-belt is loose.
Other (other than the
above).
HST is out of neutral.
Transmission is not
positively shifted.
Other (other than the
above).
Tires are not properly
inflated.
Other (other than the
above).
Tie-rod is not properly
adjusted.
Other (other than the
above).
Brake is not proerly
adjusted.
Brake is wet with water. →Apply brake a few
Other (other than the
above).
Improperly inflated
tires.
Other (other than the
above).
-81-
Corrective Measure
→Add or change fluid.
→Release the parking
brake.
→Adjust V-belt.
→Please contact
your CANYCOM
representative.
→Please contact
your CANYCOM
representative.
→Shift firmly.
→Please contact
your CANYCOM
representative.
→Adjust tire pressure.
→Please contact
your CANYCOM
representative.
→Please contact
your CANYCOM
representative.
→Please contact
your CANYCOM
representative.
→Adjust.
times to dry.
→Please contact
your CANYCOM
representative.
→Adjust tire pressure.
→Please contact
your CANYCOM
representative.
6
Ref.
Page 61
Page 63
Page 59
Page 64
Page 59