Installing A Hard Drive Or Ssd - Oracle Sun Fire X4240 Service Manual

Locating the Drive Release Button and Latch
FIGURE 3-3
3.2.5

Installing a Hard Drive or SSD

Installing a drive into the Sun Fire X4240 is a two-step process. You must first install
a drive into the drive slot, and then configure that drive to the server.
Caution – Before inserting a replacement drive, wait 15 seconds, and verify that
your monitoring or administration application has detected the missing or failed
drive.
To install a drive into a Sun Fire X4240:
1. If necessary, remove the drive fillers from the chassis.
The Sun Fire X4240 might have as many as eight drive fillers covering unoccupied
drive slots.
Chapter 3 Servicing Customer-Replaceable Devices 3-7