Setting Black Mark sensing + calibration
1.
Turn OFF the power switch
2.
Hold on the button then turn ON the power switch
3.
Release the button when the LED becomes
(Any green/amber will do during the 5 blinks)
The LED color will change in the following order:
Green
amber
(5 blinks)
Setting Gap sensing + calibration
1.
Turn OFF the power switch
2.
Hold on the button then turn ON the power switch
3.
Release the button when the LED becomes
red/amber will do during the 5 blinks)
The LED color will change in the following order:
Green
(5 blinks)
red (5 blinks)
red/amber (5 blinks)
amber
red (5 blinks)
red/amber
(5 blinks)
- 33 -
green/amber
amber (5 blinks)
solid green
Release button
red/amber
amber (5 blinks)
solid green
Release button
and blinking.
green (5 blinks)
and blinking. (Any
green (5 blinks)
green/amber
green/amber