Sensors - AMT Datasouth Fastmark M5e User Manual

Sensors

This option is used to calibrate the selected sensor. We recommend sensor
calibration when changing media and before printing.
Item
Auto
Calibration
Manual
setup
Threshold
Detect
Maximum
Length
Advanced
Description
This option is used to set the media sensor type and
calibrate the selected sensor automatically. Printer will
feed 2 to 3 gap labels to calibrate the sensor sensitivity
automatically.
In case "Automatic" does not apply to the media type,
use "Manual" function to set the media length and gap/b
line size. Then scan the backing/mark to calibrate the
sensor sensitivity.
This option is used to set sensor sensitivity in fixed or
auto mode.
This option is used to set the maximum length for label
calibration.
This function can set the minimum media length and
maximum gap/b line length for "auto-calibrate" sensor
sensitivity.
- 42 -
Default
N/A
N/A
Auto
9.9
inch
N/A