Loading media with cutter (option)
Use "Diagnostic Tool" or LCD menu function to set the media sensor type and
3.
calibrate the selected sensor.
4.
Use the DiagTool or LCD menu function
to enable the cutter mode.
5.
Press the FEED button to test.
Note: Please calibrate the gap/black mark sensor when changing media.
5.
Disengage the top cover
support to close the top cover.
Printer is ready for peel-off
mode.
6.
Press the FEED button to test.
Note:
This peel-off module is supported
for the thermal/ plain label only.
1.
Lead the media through the cutter
paper opening.
2.
Close the printer cover.
- 23 -