AMT Datasouth Fastmark M5e User Manual page 41

Media Power
Up
Head Close
Label Top
Left Position
Reprint Mode
Format
Convert
Note:
If printing from enclosed software/driver, it will take precedence and overwrite
the settings entered from the panel.
This option is used to set the media action when you turn
on the printer.
Selections Description
Feed
Printer will advance one label
Printer will calibrate the sensor levels,
Calibration
determine length and feed label
Printer will determine length and feed
Length
label
No Motion Printer will not move media
This option is used to set the media action when you
close the print head mechanism.
Selections Description
Feed
Printer will advance one label
Printer will calibrate the sensor levels,
Calibration
determine length and feed label
Printer will determine print length and feed
Length
label
No Motion
Printer will not move media
This option is used to adjust print position vertically on
the label. The range is -120 to +120 dots.
This option is used to adjust print position horizontally on
the label. The range is -9999 to +9999 dots.
When reprint mode is enabled, you can reprint the last
label printed by pressing the UP
control panel.
Selects the bitmap scaling factor. The first number is the
original dots per inch (dpi) value; the second, the dpi to
which you would like to scale.
- 41 -
No
Motion
No
Motion
+0000
Disabled
button on the
None
0