Using Rs-232 Interface To Setup Ethernet Interface - AMT Datasouth Fastmark M5e User Manual

Using RS-232 interface to setup Ethernet interface

1.
Connect the computer and the printer with a RS-232 cable.
2.
Turn on the printer power.
3.
Start the Diagnostic Utility by double clicking on the
Select "COM" as interface then click on the "Setup" button to select the
4.
serial port baud rate, parity check, data bits, stop bit and flow control
parameters.
Click on the Printer Function "Ethernet Setup" button. DHCP is the
5.
default. Select "Static IP" to assign the IP address, subnet mask and
gateway for the on board Ethernet.
- 55 -
icon.