AMT Datasouth Fastmark M5e User Manual page 15

4. Insert the paper core right side onto the rewind hub. Align the notches
on the left side and mount onto the spokes.
5. Stick the ribbon onto the ribbon
rewind paper core. Additional tape
may be required.
6. Turn the ribbon rewind gear until the
ribbon plastic leader is thoroughly
wound and the black section of the
ribbon covers the print head.
TIP:
ribbon surface. Remove the piece of tape,
if the black ribbon material is removed
you have the correct surface facing
outward. If not, turn the ribbon over
to the opposite side.
- 15 -
Apply a small piece of tape to the black