Using Ethernet Interface To Setup Ethernet Interface - AMT Datasouth Fastmark M5e User Manual

Using Ethernet interface to setup Ethernet interface

1.
Connect the computer and the printer to the LAN.
2.
Turn on the printer power.
3.
Start the Diagnostic Utility by double clicking on the
Select "Ethernet" as the interface then click on the "Setup" button to
4.
setup the IP address, subnet mask and gateway for the on board
Ethernet.
Click the "Discover Device" button to explore the printers that exist on
5.
the network.
6.
Select the printer in the left side of listed printers, the correspondent IP
address will be shown in the right side "IP address/Printer Name" field.
Click "Change IP Address" to configure the IP address obtained by
7.
DHCP or static.
- 56 -
icon.