Setting The Lcd Monitor's Brightness; Setting The Beep - Epson PHOTOPC 800 User Manual

Changing the setting
To change this feature's setting, follow these steps.
1. Turn the camera's dial switch to
2. Press the MENU button. The current setting
appears in the upper right of the LCD monitor.
3. To change the setting, press the button next to the
current setting.
Turning the camera back on
When the dial switch in set to an orange icon, you can
turn the camera back on by pressing the shutter
button, or turning the dial switch off, then on again.
When the dial switch is set to
the camera back on by pressing any button on the back
of the camera, or by turning the dial switch off, then
on again.

Setting the LCD monitor's brightness

.

Setting the beep

or , you can turn
Follow the steps below to change the LCD monitor's
brightness level.
1. Turn the dial switch to
2. Press the MENU button.
3. Press the + or - button to increase or decrease the
brightness level.
You can have the camera beep whenever you press
any of its buttons, only when you use the shutter
button, or never. Follow these steps to change the beep
setting.
1. Turn the dial switch to
2. Press the MENU button. Then press the W.B.
button to select Always, Shutter or Never.
.
.
2-27
Taking Pictures
2