Setting The Date And Time - Epson PHOTOPC 800 User Manual

To change the language setting, see "Selecting the
language" on page 2-28.
Next, set the date and time as described in the
following section.

Setting the date and time

When you install the batteries for the first time, you
need to set the date (year, month, and day) and time
(hour and minutes). After you make these settings, the
camera automatically records the date and time of
each picture.
Follow these steps to set the clock on the LCD monitor.
Note:
If you connect the PhotoPC 800 to your computer and access
EPSON Photo!3 when the camera's clock is not set, the
camera's date and time is set to that of the computer's
automatically. For instructions on connecting the camera
to the computer and accessing EPSON Photo!3, see the
EPSON Photo!3 User's Guide.
1. Turn the camera's dial switch to
appears with the setting for the month
highlighted in red.
2.
3.
4.
You are now ready to take pictures with your PhotoPC
800. Turn to Chapter 2, "Taking Pictures" for simple,
step-by-step instructions.
After taking photos, you can transfer the images to
your computer in the following ways:
. A screen
Note:
If you do not want to set the clock, press the MENU
button to exit the menu.
Press the + or - button to increase or decrease the
number, until the month is correct.
Press the ISO or W.B. button to move through each
item, and make adjustments as described in the
previous step.
When the day, year, hour, and minute settings are
correctly adjusted, press the MENU button.
Using your camera along with EPSON Photo!3
software. For software installation instructions,
see the EPSON Photo!3 User's Guide.
Using the Direct Print to print photos. For more
information see Chapter 4, "Using Direct Print to
Print Photos".
Getting Started
1
1-11