Viewing A Slide Show Of Your Photos - Epson PHOTOPC 800 User Manual

Viewing a slide show of your photos

The slide show feature automatically plays back
photos on your camera's LCD monitor. Your PhotoPC
800's slide show includes navigation features and
gives you full control of the photos in your slide show.
To use the slide show, follow these steps.
Note:
To adjust the monitor brightness, see "Setting the LCD
monitor's brightness" on page 2-27.
1. Turn the camera's dial switch to
2. Hold down the MENU button until the screen
changes, then press the button next to SLIDE
SHOW.
3. Press the + button to select the slide show speed.
You can have the photos change automatically
every three, five, or ten seconds, or you can choose
to change the photos manually.
Note:
You can also rotate the photos, or exclude photos from
and add photos to the slide show. See the next sections
for instructions.
4. Press the button next to Start to begin the slide
show.
Excluding or adding photos
All photos saved in the CompactFlash Card in your
camera are automatically included in the slide show.
To exclude any of the photos from the slide show, or
. to add any excluded photos to the slide show, follow
these steps.
1.
2.
3.
To pause and restart the slide show, press the
MENU button. When paused, you can view the
previous photo by pressing the ISO button.
To stop the slide show, press the button at the
lower right of the LCD monitor.
Turn the camera's dial switch to
Hold down the MENU button until the screen
changes, then press the button next to SLIDE
SHOW.
Press the - button.
To make choosing photos easier, you can display
four or nine photos at a time by pressing the ISO
button once or twice. A white frame appears
around one of the photos.
Viewing and Managing Your Photos
3
.
3-3