Epson PHOTOPC 800 User Manual page 97

Make sure the batteries are installed correctly. See
"Installing the batteries" on page 1-6. Also, make
sure you are using appropriate batteries and that
they are sufficiently charged. See "Replacing the
batteries" on page 1-7 and "Charging the
batteries" on page 1-4.
Your camera may not be compatible with local
television broadcasting standards. Cameras
purchased in countries using the NTSC standard
can only be used with NTSC televisions, and
cameras purchased in countries conforming to the
PAL standard can only be used with PAL
televisions.
Note:
Also, see your television documentation for possible
solutions.
You cannot take a picture with the camera when a
CompactFlash Card is installed.
Check your camera's LCD monitor for messages.
If you get a message indicating that you need to
format or eject the card. To format the memory
card, see page "Formatting memory cards" on
page 5-5. To remove the card, see "Installing and
removing a CompactFlash Card" on page 1-9.
6-6
Maintenance and Troubleshooting
Your card's memory may be full. Check the
picture counter on the display panel. If it reads 0,
the memory is full. In this case, change to another
card, erase some pictures using the LCD monitor,
or transfer the pictures to your computer and then
erase them.
Note:
To erase pictures with the LCD monitor, see page
"Erasing photos" on page 3-5. To transfer pictures to
your computer before erasing them, see the EPSON
Photo!3 User's Guide.
Even after you take a picture, the number on the
display panel stays the same.
This number shows how many more pictures you
can take. The number may not change, depending
on the image quality or complexity of the photos
you take.
You cannot copy software to or delete it from the
memory card.
Make sure the memory card is installed correctly.
See "Installing and removing a CompactFlash
Card" on page 1-9, and reinstall the memory card
if necessary.