Setting The Lcd Monitor's Brightness; Adjusting The Speaker Volume; Setting The Beep - Epson PhotoPC 850Z User Manual

Turning the camera back on
When the dial switch in set to an orange icon, you can
turn the camera back on by pressing the shutter
button, or turning the dial switch off, then on again.
When the dial switch is set to
the camera back on by pressing any button on the back
of the camera, or by turning the dial switch off, then
on again.

Setting the LCD monitor's brightness

Follow the steps below to change the LCD monitor's
brightness level.
1. Turn the dial switch to
2. Press the ISO button.
3. Press the + or - button to increase or decrease the
brightness level.
or , you can turn
.

Adjusting the speaker volume

You can adjust the volume of the built-in speaker.
Follow these steps.
1. Turn the dial switch to
2. Press the ISO button.
3. Press Volume to adjust the speaker volume:
Volume Hi or Low appears on the monitor.
4. Press BACK to return to the previous screen.

Setting the beep

You can have the camera beep whenever you press
any of its buttons, only when you use the shutter
button, or never. Follow these steps to change the beep
setting.
1. Turn the dial switch to
Press the ISO button. Then press the ISO button to
2.
select Always, Shutter, or Never.
3. Press BACK to return to the previous screen.
.
.
2-31
Taking Pictures
2