The Image System; Taking Photos Using The Lcd Monitor ̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶̶22 - Epson L-300 User Manual

THE IMAGE SYSTEM
A brief description of how to take photos.
TAKING PHOTOS USING THE LCD MONITOR
You can use the LCD Monitor to compose your photo using automatic focusing.
The captured image will appear, then disappear.
Press the POWER button to turn the
camera ON.
The lens will extend and the cover will open.
The picture will appear on the LCD screen.
Center the subject in the middle of
the focus frame of the LCD monitor.
Press the SHUTTER button halfway
to set the focus.
When focus is set, the indicator light turns steady
and the focus frame on the LCD monitor will
turn green. When the picture is not in focus the
indicator light will flash and the focus frame on the
LCD monitor will turn red. If this occurs, take your
finger off the shutter button and try refocus the
picture.
Please note that the picture will not focus if your
subject is closer than 50 cm. Use the MACRO
mode. (See page 50.)
22
Indicator light(green)
focus frame