Call Recording - Yealink SIP-T21 E2 User Manual

You can receive a visual or/and an audio alert (if enabled) on your phone when the
monitored user receives an incoming call. For more information, refer to
(BLF)
on page
Note
The pickup code is used in the following order of preference:
BLF List Pickup Code (Account->Advanced)>Directed Call Pickup Code
(Account->Advanced)>Directed Call Pickup Code (Features->Call Pickup). If all of them
are not configured, pressing the BLF List key will directly call the monitored user when
he/she receives an incoming call. For more information about pickup Code, refer to
Pickup on page 98.
You can record calls by pressing a record key on the phone. The SIP-T21(P) E2 IP phone
supports record and URL record.
Two ways of call recording:
Record: The phone sends SIP INFO message containing a specific header "Record:

on/off" to trigger a recording.
URL Record: The phone sends HTTP URL request to trigger a recording. Contact

your system administrator for the predefined URL.
Note
Call record is not available on all servers. Contact your system administrator for more
information.
To configure a record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press
4. Press
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To configure a URL record key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
.
105
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select Record from the Key Type field.
Advanced Phone Features
Busy Lamp Field
Call
109