Yealink SIP-T21 E2 User Manual page 120

User Guide for the SIP-T21(P) E2 IP Phone
3. Press
4. Enter the URL (e.g., http://10.1.2.224/phonerecording.cgi) in the Value field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Record and URL record keys are configurable via web user interface at the path
DSSKey->Line Key.
The Record and URL Record keys control the recording function, and are available:
During an active call

When calls are on hold or mute

During a blind or attended transfer

During a conference call

When the phone prompts you to answer an incoming call

The Record and URL Record keys are not available when:
There are no connected calls on your phone

You place a new call

To record a call:
1. Press the Record or URL Record key during a call.
If the recording starts successfully, the recording icon will appear on the LCD screen
and the Record or URL Record key LED will flash green.
2. Press the Record or URL Record key again to stop recording.
The recording icon disappears from the LCD screen and the Record or URL Record
key LED goes out.
Recording status indicators you need to know:
Circumstance
A recording is started
A recording cannot be started
A recording cannot be stopped
The recording box is full
The call cannot be recorded
110
or , or the Switch soft key to select URL Record from the Type field.
Icons on the LCD screen
appears on the LCD screen
appears for 1 second
appears for 1 second, then goes back
appears for 1 second
appears for 1 second