Yealink SIP-T21 E2 User Manual page 46

User Guide for the SIP-T21(P) E2 IP Phone
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the
Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
3. Press the Add soft key.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Press
Account field.
If Auto is selected, the phone will use the default account when placing calls to the
contact from the local directory.
6. Press
Ring field.
If Auto is selected, this contact will use the ring tone according to the priority: Group
ring tone (refer to
ring tone (refer to
7. Press the Add soft key to accept the change or the Back soft key to cancel.
Note
If the contact has existed in the directory, the LCD screen will prompt "Contact name
existed!".
Adding Contacts from Call History
To add a contact to the local directory from the call history:
1. Press the History soft key.
2. Press
36
or , or the Switch soft key to select the desired account from the
or , or the Switch soft key to select the desired ring tone from the
Adding Groups) >Account ring tone (refer to
Ring Tones).
or to highlight the desired entry.
, press Menu->Directory->Local
directory
Ring Tones)>Phone