Hot Desking - Yealink SIP-T21 E2 User Manual

You can listen to the recordings stored on your server system. For example, you can dial
an access code to listen to the recordings.
Note
The way in which you listen to the recordings may be different depending on the server.
Contact your system administrator for more information.
Hot desking originates from the definition of being the temporary physical occupant of
a work station or surface by a particular employee. A primary motivation for hot
desking is cost reduction. This feature is regularly used in places where not all the
employees are in the office at the same time, or not in the office for very long, which
means that actual personal offices would be often vacant, consuming valuable space
and resources.
You can use hot desking on the SIP-T21(P) E2 IP phone to log out of the existing accounts
and then log into a new account. As a result, many users can share the phone resource
at different times. To use this feature, you need to configure a hot desking key in
advance.
Note
Hot desking is not available on all servers. Contact your system administrator for more
information.
To configure a hot desking key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press
4. Press
field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Hot desking key is configurable via web user interface at the path DSSKey->Line Key.
To use hot desking:
1. Press the hot desking key when the phone is idle.
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select Hot Desking from the Key Type
Advanced Phone Features
111