To Place Multiple Calls On The Bridged Line - Yealink SIP-T21 E2 User Manual

- Press the line key when the phone is idle to enter the pre-dialing screen.
Enter the desired number using the keypad and press
key.
The phone will dial the entered number.

To place multiple calls on the bridged line:

You can have more than one call on the bridged line. To place a new call when there is
an active call on phone A, do one of the following on the phone A:
Press the Hold soft key. The original call is placed on hold.
-
Press the NewCall soft key to enter the pre-dialing screen.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Phone A will dial the entered number.
- Press the line key. The original call is placed on hold.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Phone A will dial the entered number.
When the phone C dials the BLA number "14084588327", an incoming call will arrive on
the bridged line. The phone A and phone B ring simultaneously and the LED indicators
of the line key on both phone A and phone B will flash green. You can answer the
incoming call on either phone A or phone B but not both.
Do one of the following on phone A or phone B:
Press , or the Answer soft key on phone A.
-
Phone B stops ringing. The LED indicator of the line key on the phone A will
illuminate solid green. At the meanwhile, the LED indicator of the line key on the
phone B will illuminate solid red indicating that there is an active call on the phone
A.
Press , or the Answer soft key on phone B.
-
Phone A stops ringing. The LED indicator of the line key on the phone B will
illuminate solid green. At the meanwhile, the LED indicator of the line key on the
phone A will illuminate solid red indicating that there is an active call on the phone
B.
To place a call on hold:
1. Press the Hold soft key on phone A when party A and party C are talking.
Advanced Phone Features
, , or the Send soft
141