Label will appear on the LCD screen when receiving the multicast RTP stream.
4.
Click Confirm to accept the change.
Note
The priorities of listening addresses are predefined: 1 with the highest priority, 10 with the
lowest.
Multicast listening addresses are configurable via web user interface only.
To configure paging barge and paging priority active features via web user interface:
1.
Click on Directory->Multicast IP.
2.
Select the desired value from the pull-down list of Paging Barge.
3.
Select the desired value from the pull-down list of Paging Priority Active.
4.
Click Confirm to accept the change.
Advanced Phone Features
119