Yealink SIP-T21 E2 User Manual page 126

User Guide for the SIP-T21(P) E2 IP Phone
4. Press
field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Paging list key is configurable via web user interface at the path DSSKey->Line Key.
To configure paging list via phone user interface:
1. Press the paging list key when the phone is idle.
2. Press
The default tag is Empty if it is not configured before.
3. Press the Option soft key and then press the Edit soft key.
4. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the
Address field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
5. Enter the group name in the Label field.
6. Press the Save soft key to accept the change.
7. Repeat the step 2-6, you can add more paging groups.
Paging list is configurable via web user interface at the path: Directory->Multicast IP.
To delete paging group via phone user interface:
1. Press the paging list key when the phone is idle.
2. Press
116
or , or the Switch soft key to select Paging List from the Key Type
or to select a desired paging group.
or to select a desired group.