Local Conference; To Configure Call Waiting Via Phone User Interface; To Set Up A Local Conference Call - Yealink SIP-T21 E2 User Manual

User Guide for the SIP-T21(P) E2 IP Phone
when there is an active call on the phone. You can also enable or disable the phone to
play a warning tone when receiving another call.

To configure call waiting via phone user interface:

1. Press Menu->Features->Call Waiting.
2. Press
field.
3. Press
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code
or Off Code field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path Features->General
Information.
You can create a conference with other two parties using the phone's local conference.
You can create a conference between an active call and a call on hold by pressing the
Conf soft key. The SIP-T21(P) E2 IP phone also supports network conference.
Note Network conference is not available on all servers. For more information, contact your
system administrator.
The SIP-T21(P) E2 IP phone supports up to 3 parties (including yourself) in a conference
call. This is the default method of conference called Local Conference.

To set up a local conference call:

1. Place a call to the first party.
2. When the first party answers the call, press the Conf soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, press the Conf soft key again to join all
94
or , or the Switch soft key to select Enabled from the Call Waiting
or , or the Switch soft key to select Enabled from the Play Tone field.
, , or the Send soft key.