Yealink SIP-T21 E2 User Manual page 98

User Guide for the SIP-T21(P) E2 IP Phone
before forwarding from the After Ring Time field.
The default ring time is 12 seconds.
4) (Optional.) Enter the no answer forward on code or off code respectively in
the On Code or Off Code field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the status bar indicates that the call forward is enabled.
To enable call forward in custom mode:
1. Press Menu->Features->Call Forward.
2. Press
3. Press
soft key.
4. Depending on your selection:
a.) If you select Always Forward, you can enable it for a specific account.
1) Press
Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
3) (Optional.) Enter the always forward on code or off code respectively in the
On Code or Off Code field.
You can also enable always forward for all accounts. After always forward was
enabled for a specific account, do the following:
1) Press
2) Press the All Lines soft key.
88
or to select the desired account, and then press the Enter soft key.
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select Enabled from the Always
or to highlight the Always Forward field.