Separating Protective Devices; Protective Cover Of The Belt Pulleys; Drill Chuck Guard; Personal Protective Equipment - Optimum B 24 H Operating Manual

Safety
1.10

Separating protective devices

1.10.1

Protective cover of the belt pulleys

A protective cover for the belt
pulleys is mounted on the drill-
ing head. A switch is integrated
in the protective cover which
monitors
closed.
INFORMATION
YOU CANNOT START THE
MACHINE IF THE PROTEC-
TIVE COVER IS NOT CLOSED.
1.10.2

Drill chuck guard

Adjust the drill chuck guard to the cor-
rect height before you start working.
To do so, detach the clamping screw,
adjust
retighten the clamping screw.
A switch is integrated in the fixture of
the drill chuck guard which monitors
that the cover is closed.
INFORMATION
YOU CANNOT START THE
MACHINE IF THE DRILL CHUCK
GUARD IS NOT CLOSED.
1.11

Personal protective equipment

For certain work, personal protective equipments is required. Such as:

Safety helmet,

Safety glasses or face guard,

Protective gloves,

Safety shoes with steel toe caps,

Ear protection.
Before starting work, make sure that the prescribed personal protective equipment is available
at the workplace.
CAUTION!
Dirty or eventually contaminated personal protective equipments might cause disease.
Clean your personal protective equipment
• after each use,
• regularly, at least once a week.
21 / 07 / 2014
that the cover is
the required height
Safety Bench drill and upright drill B24H ; B28H (B) (Vario) ; Version 2.1.7
protective
cover
clamping screw
and
drill chuck protection
OPTIMUM
M A S C H I N E N - G E R M A N Y
Img.1-3: Protective cover
Img.1-4: Drill chuck guard
Page 13