Repair - Optimum B 24 H Operating Manual

Maintenance
Interval
as required
INFORMATION!
The spindle bearing arrangement is prelubricated. It is not required to relubricate it.
6.3

Repair

Repairs must be carried out only by qualified technical staff; and must follow the instructions and
guidelines given in this manual. Should technical assistance be required, contact LDS Industries
at 1-630-785-6437.
Optimum Maschinen - Germany and LDS Industries are not liable for, nor do they guarantee
against, damage or operating malfunctions resulting from alteration, abuse, lack of main-
tenance or this product's use for other than its intended purpose. Failure to read and follow this
operating manual is not covered.
For repairs only use

Proper and suitable tools,

Parts purchased from Optimum, or its authorized agent.
21 / 07 / 2014
Where? What? How?
Img.6-6: Spindle return spring
Img.6-7: Exploded view of the spring barrel
Maintenance Bench drill and upright drill B24H ; B28H (B) (Vario) ; Version 2.1.7
OPTIMUM
M A S C H I N E N - G E R M A N Y
CAUTION!
Parts will throw out at high pressure. When
disassembling, make sure that only skilled staff
will maintain and repair the machine.
spring barrel
circlip
flat spiral spring
spring barrel
circlip
Page 53