OPTIMUM
M A S C H I N E N - G E R M A N Y
4
Operation
4.1
Safety
Use the machine only under the following conditions:
The machine is in proper working order.
The machine is used as prescribed.
The instruction manual has been followed.
All safety devices are installed and activated.
All malfunctions should be eliminated immediately. Stop the machine immediately at an event of
any malfunction in operation and make sure it cannot be started up accidentally or without
authorization.
Notify the person responsible immediately of any modification.
„Safety during operation" on page 14
4.2
Control and indicating elements
4.2.1
Bench drill and upright drill B24H
belt drive with housing
lever for spindle feed
EMERGENCY-STOP
button
ON
OFF
drill chuck guard
drill chuck
drilling table
height adjustment of
the table
Img.4-1: B24H
Page 34
Operation Bench drill and upright drill B24H ; B28H (B) (Vario) ; Version 2.1.7
lever for belt tension
Operation
21 / 07 / 2014