Optimum B 24 H Operating Manual page 52

OPTIMUM
M A S C H I N E N - G E R M A N Y
Interval
every month
every six mon-
ths
Page 52
Where? What?
Lubricat
e
Maintenance Bench drill and upright drill B24H ; B28H (B) (Vario) ; Version 2.1.7
How?

Lubricate all oilers with machine oil, do not use a grease
gun or similar greasing equipment. Use the oil bottle in
included with the machine.

„Operating material" on page 17
Oiler
Img.6-4: Oiler B24H ; B28H (B) (Vario)
Check the electrical equipment / parts of the drilling
machine.

„Qualification of employees" on page 9

The cooling pump is almost entirely maintenance-free.
Replace the cooling agent regularly, depending on
usage.

When using coolants which leave residues, the coolant
pump must be removed and rinsed possibly.

Suck the old cooling agent off with a suitable industrial
suction cup over the charging hole.

Fill in new coolant over the chip tray. The maximum
capacity of the coolant is about 3.7 quarts.
Coolant charging hole
Img.6-5: Coolant tank B28H Vario
Maintenance
21 / 07 / 2014