Mounting - Optimum B 24 H Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
3.5.1

Mounting

In order to provide for the necessary stability of the drilling machine it is necessary to firmly bolt
the base of the machine to the foundation. We recommend you to use compound anchor cart-
ridges or heavy duty anchors.
Mount the drilling machine to the
foundation using the provided
through-holes on the base.
The through-holes are marked with
arrows on the machine base.
Img.3-10: Bottom attachment
ATTENTION!
Tighten the anchor bolt nuts on the bench drill and upright drill only until it is firmly
secured and can neither move during operation nor be turned over.
If the anchor bolt nuts are too tight and the foundation is uneven, the base of the bench drill and
upright drill may break.
Page 30 Assembly Bench drill and upright drill B24H ; B28H (B) (Vario) ; Version 2.1.7
Through-hole
Arrow sign
Abb.3-8: Labeling of the anchorage
Arrow sign
Through-hole
Img.3-9: Labeling of the anchorage point on
drilling machine B28H (Vario)
Assembly
point on drilling machine
B24H, B28H (B)
21 / 07 / 2014