Hydro-Gear Ezt, Zt-2100, Zt-2200 Hydrostatic Transaxles; Checking The Hydraulic Oil Level - Toro TimeCutter SW4200 Service Manual

SPECIFICATIONS
Hydro-Gear ZT-2100, ZT-2200 Hydrostatic Transaxles
2
Lubrication
Oil Capacity ZT-2100
Oil Capacity ZT-2200
Oil Level Check
Fluid Change Interval

Checking the Hydraulic Oil Level

A. Top of fill port
B. Oil level
2-4
Fig. 001 PICT-1000
20w50 Engine Oil
54 fl. oz. / 1.687 qt. (1597ml) each
56 fl. oz. / 1.75 qt. (1650ml) each
The transaxle is a sealed system and does not require periodic checking.
Check oil at the oil fill plug location only. Do not check the oil at the vent tube.
If the oil level needs to be checked, the transaxle must be removed.
The oil level must be when the transaxle is COLD.
Please see the illustration below for fluid level specifications.
The transaxle is factory filled and does not require regular oil changes.
D
Fig. 002 PICT-1001a
C. 0.75"-1.50" (19-38mm) depth
at 50°-100° F (10°-38° C)
D. Fill port
A
C
B
Toro TimeCutter SW/SWX Service Manual