Chassis; Model & Serial Number Identification; Grease & Lubrication Point - Toro TimeCutter SW4200 Service Manual

Model & Serial Number Identification
The model and serial number identification plate is
located on the frame, near the battery, under the
operator's seat as shown below (Fig. 005).
Fig. 005
Toro TimeCutter SW/SWX Service Manual
Grease & Lubrication Point
Grease Type – No. 2 general-purpose lithium base
grease
A grease fitting is located on each of the front wheel
hubs.
The front wheel hubs should be greased every 25 hrs.
(Fig. 006)
PICT-1034

CHASSIS

Fig. 006 PICT-1035
3
3-1