Toro TimeCutter SW4200 Service Manual page 73

HYDROSTATIC DRIVE SYSTEM
6. Remove the brake rod from the brake actuator
module (Fig. 060). See "Brake Actuator Module" on
page 7-6.
5
5-8
Fig. 060
IMG-0968b
7. Remove the brake rod from the hydro:
All TimeCutter SW 54 inch SWX 50 inch models only
– Remove the nut (A) and the spring. Remove the brake
rod from the unit (Fig. 061).
Fig. 061
All TimeCutter SW 32 & 42 inch and SWX 42 inch
models – Remove the nut (B), spring and washer.
Remove the brake rod from the unit (Fig. 062).
Fig. 062
Toro TimeCutter SW/SWX Service Manual
A
PICT-1101
B
PICT-1102