Toro TimeCutter SW4200 Service Manual page 34

FRONT SHROUD - ZERO TURN TRACTOR
5. With the heel of your hand or soft tapping from a
soft mallet, tap the steering wheel until it comes
loose from the splined steering shaft. Remove
the nut and remove steering wheel.
6. Remove the T-30 Torx screws holding the
shroud on.
Toro TimeCutter SW/SWX Service Manual
7. Remove the rear cover.
8. Fold the steering column all the way into the
down position. Slide front shroud up and off the
steering column.
CHASSIS
3
3-11