Connecting To The Network; Ethernet Connectors; Connecting The Cable - Omron SYSMAC CJ1W-EIP21 Operation Manual

Connecting to the Network

3-5

Connecting to the Network

3-5-1

Ethernet Connectors

3-5-2

Connecting the Cable

!Caution Turn OFF the PLC's power supply before connecting or disconnecting twisted-
!Caution Allow enough space for the bending radius of the twisted-pair cable as shown
44
The following standards and specifications apply to the connectors for the
Ethernet twisted-pair cable.
• Electrical specifications: Conforming to IEEE802.3 standards.
• Connector structure:
Connector pin
1 Transmission data +
2 Transmission data –
3 Reception data +
4 Not used.
5 Not used.
6 Reception data –
7 Not used.
8 Not used.
Hood Frame ground
pair cable.
in below.
35 mm
RJ45 8-pin Modular Connector
(conforming to ISO 8877)
Signal name Abbr.
TD+
TD–
RD+
---
---
RD–
---
---
FG
Section 3-5
Signal direction
Output
Output
Input
---
---
Input
---
---
---