Ftp Server Application Example - Omron SYSMAC CJ1W-EIP21 Operation Manual

FTP Server Application Example

11-4 FTP Server Application Example

Note
Note
1,2,3...
IP address of the Ethernet/IP Unit or built-in EtherNet/IP port
$ ftp 150.31.2.83
connected to 150.31.2.83
220 **IPaddress** CJ1W-EIP21 FTP server(FTP**version**)ready
Name:CONFIDENTIAL
230 Guest logged in.
/: root
EM
MEMCARD
ABC (subdirectory)
DEF.IOM (file)
ftp> ls
200 PORT command successful.
150 opening data connection for ls(**IPaddress**port#**)(0bytes).
MEMCARD
EM
226 Transfer complete.
** bytes received in 0 seconds(**bytes/s)
ftp> cd MEMCARD
250 CWD command successful.
ftp> get ABC/DEF.IOM
200 PORT command successful.
150 opening data connection for abc/def.iom(**IPaddress**port#**)(**bytes).
226 Transfer complete
**bytes received in *.*** seconds(**bytes/s)
The following procedure shows how to use the FTP server by connection with
the default login name, CONFIDENTIAL. No password is required.
The login name and a password must be set in the CPU Bus Setup for the
Ethernet Unit in the CPU Unit to use any login name other than CONFIDEN-
TIAL.
When general-purpose FTP software is used, files can be transferred and
read using a graphical user interface similar to Explorer.
1. Make sure that a Memory Card is inserted in the CPU Unit and turn ON
the power supply to the PLC. If EM File Memory is to be used, create the
EM File Memory.
2. Connect to the FTP server from a computer on the Ethernet by entering
the text that is underlined in the following diagram.
3. Enter FTP commands (underlined in the following diagram) to read and
write files. The following directory tree is used in this example.
Section 11-4
Results
Login name
File names read
Results
Change to MEMCARD
directory
Results
Transfer DEF.IOM from
ABC directory
Results
307