Omron SYSMAC CJ1W-EIP21 Operation Manual page 192

Setting Tag Data Links
166
2. Select Network - Connect.
The following Setup Interface Dialog Box will be displayed.
3. Click the Setup Button in the Setup Interface Dialog Box. The Registration
of the connection Dialog Box will be displayed. Enter the network informa-
tion for the connection destination, and then click the Add Button to regis-
ter the settings.
The registration information details are as follows:
a. Registration name
Enter any name.
b. Host (PC) information
Enter information for the computer that has the Network Configurator
installed.
• Network address
Same number as the network address of the Ethernet Unit of the PLC
that will be the relay node.
• Node address
Last value in the computer's IP address (e.g., 1 for 192.168.250.1)
c. Remote Information - EtherNet/IP Unit
Enter the information for the EtherNet/IP Unit of the PLC that will be
the relay node.
• Network address
Network address set in the routing tables
Section 6-2