Ps Settings; Job Timeout; Wait Timeout; Print Ps Errors - Canon IMAGERUNNER C2550 Printer Manual
Ps/pcl/ufr ii printer guide
Hide thumbs
Also See for IMAGERUNNER C2550:
- Network manual (234 pages) ,
- Brochure & specs (16 pages) ,
- Specifications (3 pages)
Table of Contents
Advertisement
PS Settings
NOTE
These settings are only available when printing in the PS Printer.
•
An asterisk (*) indicates the default setting in this section.
•
Job Timeout
0 to 3600 seconds; 0
This setting enables you to specify the amount of time before a job times out. If a
job has not finished within the set time limit, the job automatically cancels.
Wait Timeout
0 to 3600 seconds; 300
This setting enables you to specify the amount of time the machine will wait for
data sent from the host computer before it times out. If data is not received within
the set time limit, the job automatically cancels.
Print PS Errors
On, Off
This setting determines whether an error page is printed when an error is
encountered.
seconds
*
seconds
*
*
3-65
PS Settings
3
Advertisement
Table of Contents
