Ps Settings; Job Timeout; Wait Timeout; Print Ps Errors - Canon imageRunner 5075 Manual

PS Settings

NOTE
These settings are applicable only when printing in the PS mode.

Job Timeout

3

Wait Timeout

Print PS Errors

3-52

PS Settings

0 to 3600 seconds; 0 seconds
*
This setting enables you to specify the amount of time before a job times out. If a
job has not finished within the set time limit, the job automatically cancels.
0 to 3600 seconds; 300
*
This setting enables you to specify the amount of time the machine will wait for
data sent from the host computer before it times out. If data is not received within
the set time limit, the job automatically cancels.
On, Off
*
This setting determines whether an error page is printed when an error is
encountered.
seconds