Event Edit: Event Edit; Pad Edit: Quantize; Pad Edit: Transpose - Korg PA1X User Manual

130 Pad Record mode

Event Edit: Event Edit

Other pages exhibit a slightly different structure.
Operating mode Edit section
Operating mode
This indicates that the instrument is in Pad Record mode.
Edit section
This identifies the current edit section, corresponding to one of
the items of the edit menu (see "Edit menu" on page 129).
Page menu icon
Press this icon to open the page menu (see "Page menu" on
page 135).
Parameters area
Each page contains various parameters. Use the tabs to select
one of the available pages. For detailed information on the vari-
ous types of parameters, see sections starting from page 130.
Tabs
Use tabs to select one of the edit pages of the current edit section.
Event Edit: Event Edit
The Event Edit is the page where you can edit each single MIDI
event of the selected Chord Variation. You can, for example,
replace a note with a different one, or change its playing strength
(i.e., velocity value).
Page sub-header Page header
Event list
This is very similar to the Style Record's Event Edit page. See the
User's Manual for more information on the event editing proce-
dure.
Page menu
icon
Parameters
area
Tabs
Page menu icon
Tabs Scrollbar

Pad Edit: Quantize

The quantize function may be used to correct any timing mis-
take after recording, or to give the pattern a "groovy" feeling.
After setting the various parameters, press Execute.
CV (Chord Variation)
Use this parameters to select the Chord Variation for editing.
Resolution
This parameter sets the quantization after recording.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to quantize.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to quantize.
Execute
Press this button to execute the operation set in this page.

Pad Edit: Transpose

In this page you can transpose the selected track(s).
Note: After transposing, please don't forget to readjust the "Key/
Chord" parameter in the main page of the Pad Record mode (see
page 129).
After setting the various parameters, press Execute.
CV (Chord Variation)
Use this parameters to select the Chord Variation for editing.