Lyrics & Markers Panel - Korg PA1X User Manual

144 Song Play operating mode
Lyrics & Markers panel
trol panel, then press (PLAY/STOP) in the SEQUENCER 1 sec-
tion again.
Song list Selected Song
Song list
Use this list to browse through the Songs in the Jukebox list. Use
the scrollbar to scroll the list.
Selected Song
Name of the Song currently in play. You can select a different
Song from the list, and press the Select button in the display to
selected it for playback.
Select button
Press this button to select the Song highlighted in the list, and
assign it to Sequencer 1. If a Song is already playing, it will be
stopped, and the selected Song will start playing back.
Jukebox file
Name of the selected Jukebox file. To edit this file, see "Jukebox
Editor" on page 151.
Transport controls for the Jukebox
When you select a Jukebox file, Sequencer 1 transport controls
work in a slightly different way than with single Songs.
<< and >> Pressed alone, these buttons are the Rewind and
Fast Forward commands.
Keep the SHIFT button pressed, and press
these buttons to scroll to the previous or next
Song in the Jukebox list.
PAUSE Pauses the Song at the current position. Press
PAUSE or
playing again.
(PLAY/STOP)
Starts or stops the current Song. When you stop
the Song, the sequencer goes back to measure 1 of
the current Song.
If the Jukebox panel is open, you can select the
Song from which to start. See "Jukebox panel"
above.
Jukebox file
(PLAY/STOP) to start the Song
Lyrics & Markers panel
Lyrics side tabs
These panels show the lyrics and chord abbreviations included
in a Song, or loaded as a ".TXT" file with the Song. You can see
the following types of Lyrics:
• Lyrics included in Standard MIDI Files
• Lyrics included in Karaoke™ files
• Lyrics included in MP3 files (in ID3 format – see
www.id3.org)
• Lyrics loaded as a ".TXT" file with a Standard MIDI File,
Karaoke™ or MP3 file (see "Text files loaded with Standard
MIDI Files and MP3 files" below)
Lyrics will be shown only if they are compatible with a standard
format that Pa1X can understand.
Song chords Current measure
While the Song is playing, the text flows in the display. Chord
abbreviations (if any) will appear above the lyrics, in time with
the music (depending on the "Show Chords" parameter status,
under the Options side tab). Lyrics at the current position are
highlighted.
Song chords
Chords contained in the midifile (if any). This indicator may be
easier to read than chords shown within the lyrics.
Current measure
Current measure number.
Recognized chord
Chords played on the keyboard, and recognized by the chord
scanning engine.
Selected sequencer (SEQ 1/SEQ 2)
Use these side tabs to select a sequencer whose Song to show.
Note: You can have Sequencer 2 selected in the Main page of the
Song Play mode, and Sequencer 1 selected in the Lyrics page, or
vice-versa. This way, you can select a Song whose lyrics to display
on the external video monitor, while selecting a different sequencer
for editing operations.
Recorgnized chord
Selected
sequencer
Song
name
Display
options