Korg PA1X User Manual page 172

168 Sequencer operating mode
Sequencer Play - Main page
If the VOLUME LED above the SLIDER MODE button is turned
on, the Assignable Sliders LEDs show which view is currently
selected.
The Song Tracks 1-8 view shows individual Song tracks 1-8
(third sliders LED turned on):
The Song Tracks 9-16 view shows individual Song tracks 9-16
(last sliders LED turned on):
Track status icon
Virtual sliders (track volume)
Virtual sliders are a graphical display of each track's volume. Use
the Assignable Sliders to change this value (provided the VOL-
UME LED is turned on above the SLIDER MODE button, see
below).
As an alternative, press the track's area to select a track, and use
TEMPO/VALUE controls to change the value.
Virtual slider
Assignable Sliders function
Use the SLIDER MODE button to select the function assigned to
the Assignable Sliders. When the VOLUME LED is turned on,
each Assignable Slider controls the volume of the corresponding
track.
Note: While in Sequencer mode, you cannot save the SLIDER
MODE status to a Performance, since Performances are disabled
while in this mode.
Track status icons
Play/mute status of the current track. Select the track, then press
this area to change the track status. The status of Song tracks is
saved when saving the Song.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Track names
Under the sliders, a label for each track is shown. Use the TRK.
SEL button to switch between tracks 1-8 and 9-16.
T01...T16 Song tracks.
Seq