Pitch: Pitch Mod - Korg PA1X User Manual

Voice Assign Mode
Single Trigger
Use this parameter to set the sample as a single-triggered one.
On When the same key (note) is played repeatedly,
the previous note will be stopped before the new
note is triggered, so that they will not overlap.
Off When the same key (note) is played repeatedly,
the previous note will not be stopped before the
new note is triggered.
Exclusive Group
Exclusive Groups are sets of mutually exclusive keys, stopping
each other. For example, if the Open Hi-Hat and Closed Hi-Hat
are assigned the same Exclusive Group, playing an Open Hi-Hat
will stop the Closed Hi-Hat playing.
None No Exclusive Group assigned. The selected key
will not be stopped by any other key.
1...127 Exclusive Groups assigned to the selected key.
When you play this key, all other keys assigned to
the same Exclusive Group will be stopped, and
this key will be stopped by other keys assigned to
the same Exclusive Group.
Enable Note On Receive
Use this parameter to enable/disable the reception of the Note
On (Key On) message.
On The Note On message is normally received.
Off The Note On message is not received. Therefore,
the corresponding key is muted.
Enable Note Off Receive
Use this parameter to enable/disable the reception of the Note
Off (Key Off) message.
On The sound will stop as soon as you release the
key.
Off The sound will continue playing up to the end of
the sample. The Note Off message is ignored.
Mixer
Pan
This parameter sets the position in the stereo panorama of the
selected key.
Send FX1
This parameter sets the FX1 send level for of the selected key.
Send FX2
This parameter sets the FX2 send level for of the selected key.
Sound operating mode

Pitch: Pitch Mod

Here you can make pitch settings for each oscillator. These set-
tings specify how keyboard location will affect the pitch of each
oscillator, and select the controllers that will affect the oscillator
pitch and specify the depth of control. You can also specify the
amount of pitch change produced by the Pitch EG and by LFO1
and LFO2, switch portamento on/off and specify how it will
apply.
Pitch
Pitch Slope
Normally you will leave this parameter at +1.0. Positive (+) val-
ues will cause the pitch to rise as you play higher notes, and neg-
ative (–) values will cause the pitch to fall as you play higher
notes.
With a value of 0, there will be no change in pitch, and the C4
pitch will sound regardless of the keyboard location you play.
The diagram shows how the Pitch Slope and pitch are related:
Pitch
2oct
1oct
1oct
-1.0...+2.0 Pitch slope value.
JS (+X)
This parameter specifies how the pitch will change when the joy-
stick is moved all the way to the right. A setting of 12 produces 1
octave of change.
For example if you set this to +12 and move the joystick all the
way to the right, the pitch will rise one octave above the original
pitch.
-60...+12 Maximum pitch change in semitones.
JS (–X)
This parameter specifies how the pitch will change when the joy-
stick is moved all the way to the left. A setting of 12 produces 1
octave of change.
For example, if you set this to -60 and move the joystick all the
way to the left, the pitch will fall five octaves below the original
197
Pitch: Pitch Mod
+2
+1
0
–1
C4 C5
Key