General Controls: Lock - Korg PA1X User Manual

232 Global edit mode

General Controls: Lock

General Controls: Lock
This page, split in four panes that can be selected by means of
the correspodning side tabs, contains all the available locks,
sometimes grouped under just a single lock. Locks prevent
parameter values to be changed when loading data from disk, or
selecting a different Performance, Style or STS.
Lock–Tuning pane
Lock–Control pane
Lock–FX & Voice Processor pane
Lock–Style pane
Locks
All the available locks. Lock them to prevent changes due to
loading or selecting different elements. These locks are also
found in various other pages, next to the locked parameter.
Hint: To save the status of the various parameters as a fixed status
for the Pa1X, save all the parameters to Performance 1 of bank 1
(automatically selected when turning on the instrument), and save
these locks to the Global.
Master Transpose
When locked, master transpose is not automati-
cally changed when selecting a different Perfor-
mance or style.
(See "Master transpose" on page 78).
Style Performance Master Transpose Lock
When closed, this lock prevents a Style change to
modify the Master Transpose. When open,
changing a Style may also change the Master
Transpose.
(See "Master transpose" on page 78).
Hint: In order to avoid having the Master Trans-
pose setting change when selecting a new Perfor-
mance or STS, use the general Master Transpose
Lock (the first parameter in this page).
Note: When the Master Transpose Lock is closed,
this parameter has no effect. However, the Master
Transpose Lock also locks the Style Performance
Transpose.
Sub Scale/Quarter Tone
When locked, selecting a Performance or STS will
not change the Sub-Scale or Quarter Tone value.
(See "Sub-Scale panel" on page 83).
Auto Octave This lock lets you decide if the instrument will
automatically transpose the Upper tracks when
switching between the FULL UPPER and the
SPLIT Keyboard modes.
• If On, when switching to the FULL UPPER or
SPLIT Keyboard Mode, the Upper tracks trans-
position is left unchanged.
• If Off, when switching to the FULL UPPER Key-
board Mode, the Upper tracks Octave Transpose
is automatically set to "0". When switching to the
SPLIT Keyboard Mode, the Upper tracks Octave
Transpose is automatically set to "-1".
Assignable Switches
When locked, selecting a Performance or STS will
not change the Assignable Switch assignment.
(See "Pad/Switch:
page 94).
Slider Mode When locked, selecting a Performance or STS will
not change the selected status of the SLIDER
MODE button.
(See "Assignable Sliders A 1-8, B 1-8" on
page 235).
Gbl
Assignable Switch" on