General Controls: Interface - Korg PA1X User Manual

234 Global edit mode

General Controls: Interface

General Controls: Interface
This page contains parameters related to the way messages are
shown in the display.
Help/Message Language
Language
Use this pop-up menu to select one of the available languages for
the online help system. Operating System version 2.0 supports
the English, French, German, Italian and Spanish languages.
Change button
Press this button to apply the selected language to the user's
interface.
How to select the Help language
1. Since Pa1X must be reset at the end of this procedure, be
sure to first save all unsaved data.
2. While in this page, select a language from the pop-up
menu.
3. The Change button will start flashing in red. Press it.
4. You will be asked if you want to save the Global, and select
the new language. Press Yes to confirm. The Global will be
automatically saved, and the language selected.
5. A message will advice you to reboot the Pa1X. Press OK to
close the message window.
6. Turn the Pa1X off, then on again.
Program Change
Show Program Change number
Program Change display next to Sound names can be turned on
or off, to make the interface less cluttered with data.
Check this parameter to show Program Change numbers next to
Sound names in the main page of the Style Play and Song Play
operating modes, and in the various Single Track Info areas.
Note: Program Change numbers are always shown in Sound Edit
mode.
Track Activity
Show Track Activity
Use this parameter to turn on/off the Track Activity display.
When it is turned on, you can monitor events coming from the
tracks or the MIDI inputs. Incoming events are shown by the
changing color of each track's label.
Here is the list of colors and their meaning:
Red Data coming from the MIDI IN ports.
Light Blue Internal data, generated by the keyboard, pads,
the Arranger or one of the Sequencers.
Grey Either internally or externally generated data (or
both at the same time).
Dark Blue No data received.
Gbl
Acc/Seq Slider
Acc/Seq Slider
The ACC/SEQ VOLUME slider on the control panel can control
the volume of all Style or Song tracks, while leaving Keyboard
and Pad tracks unchanged, or act as a balance control, mixing
between the Keyboard and the Style or Song tracks.
Acc/Seq Volume
Choose this option to make the ACC/SEQ VOL-
UME slider control the volume of all Style or
Song tracks, while leaving Keyboard and Pad
tracks unchanged.
Acc/Seq-RealTime Balance
Choose this option to make the ACC/SEQ VOL-
UME slider act as a balance control, mixing
between the Keyboard and the Style or Song.
These functions are respectively called Style/RT
Track Balance and Song/RT Track Balance.
Auto Select
Auto Style Select
Auto Performance/Sound Select
Gbl
When one of these parameters is checked, the last selected Style,
Performance or Sound selected in a bank is immediately selected
when pressing the bank button.
This way, you can assign your preferred Style, Performance or
Sound to each control panel's button, and select it just with a
single press.
However, the Style/Perf/Sound Select window still appears when
you press one of the bank buttons, so you can select a different
item if desired.
Note: Unless you save your settings by means of the "Write Global-
Auto Select Setup" page menu command, the memorized Style,
Gbl
Gbl
Gbl
Gbl