Sts Name Panel; Mic Panel - Korg PA1X User Manual

82 Style Play operating mode

STS Name panel

The assigned function may be saved to a Performance or STS.
Therefore, when selecting a Performance or STS, the assigned
function may change.
Track status icons
Play/mute status of the current track. Select the track, then press
the track area again to change its status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Track names
Under the sliders, a label for each track is shown. Use the TRK.
SEL button to switch between the various track views.
MIC/IN Audio inputs. [*]
UPPER1...3 Upper tracks.
LOWER Lower track.
ACCOMP Grouped Accompaniment tracks. [*]
DR/PERC Grouped Drum and Percussion tracks. [*]
BASS Bass Style track.
DRUM Drum Style track.
PERC Percussion Style track.
ACC1...5 Accompaniment Style tracks.
[*] Volume for these tracks is not memorized.
STS Name panel
Press the STS Name tab to select this panel. While in this panel,
you can see the name of the four Single Touch Settings (STS)
belonging to the latest selected Style or SongBook entry. Touch
one of the names to select the corresponding STS.
Note: You cannot edit STS names with this panel. To edit a name,
select the STS to be renamed, then select the Write Single Touch
Setting command from the page menu (see "Write Single Touch
Setting dialog box" on page 98).

Mic panel

Press the Mic tab to select this panel. This is where you can turn
Sty
on/off the various Voice Processor sections.
Harm/Mod (Harmony/Modeling)
Turns the Harmony or Modeling module on/off. (The Modeling
module is optional).
Lead
Turns the Lead (singer's) voice on/off. This switch only works
when the Harmony module is turned on. if it is turned off, the
Lead voice will be always heard, whichever the status of this
switch.
V1...V4
Turns each of the four Harmony voices on/off.
Pitch
Turns the Pitch Correct module on/off. (The Pitch Correction
module is optional).
Thicken
Turns the Thicken module on/off.
Effects
Turns the Effects module on/off.
Talk
Check this switch to soften all music generated by the Pa1X, and
speak on the microphone at normal level. This is useful to speak
with your audience, while automatically lowering the back-
ground music volume.
While this switch is checked, all Voice Processor modules are
momentarily turned off, except for Thicken and Reverb, whose
level is simply reduced to avoid losing clarity on the voice. Set-
ting for the Talk function can be programmed on the Talk page
(see "Voice Processor Setup: Talk" on page 244).
Uncheck this switch to return to the original settings.
Mic Mute
Check this switch to completely mute the microphone input.
This is the same as the MIC/IN Play/Mute icon in the Main page
(see "Track status icons" on page 82).
VP Preset
Use this pop-up menu to select one of the available Voice proces-
sor Presets. Selecting a Preset may change all the above parame-
ters, as well as other Voice Processor parameters. Presets can be
freely edited (see "Voice Processor Preset: Preset" on page 245).
VPp
VPp
VPp
VPp
VPp
VPp
Tlk