Selecting Timed Override; Selecting Set Back - Emerson Liebert SRC18 User Manual

3. Set the cooling setpoint by pressing
then adjust the temperature displayed
under Cool-temperature setpoint in the Temperature section of the display by pressing
4. Set the cooling setpoint by pressing
then adjust the temperature displayed
under Heat-temperature setpoint in the Temperature section of the display by pressing
8.5.7

Selecting Timed Override

Timed override temporarily overrides the current schedule (occupied/unoccupied).
• Reverts to last occupied schedule in unoccupied override.
• Reverts to last unoccupied schedule in occupied override.
See 8.6.5, Setting Override Time, page 98, to set the duration of the override.
Press for 3 seconds.
Timed override is enabled.
• To cancel timed override, press
Operation reverts to last weekly schedule.
8.5.8

Selecting Set Back

Set Back reverts to the last unoccupied schedule until set-back operation is canceled. If there is no
unoccupied schedule, it returns to the default set-back setting. See 8.6.6, Setting Set-back Temperature,
page 98, to set the set-back setting.
Press .
Set back is enabled.
• To cancel set back, press
NOTE
• You cannot changes settings in set-back mode. HL and the lock is
displayed.
• Set back is canceled if a command from another controller is received.
,
COOL
,
HEAT
for 3 seconds.
.
95
Operation
.
.
®
Liebert SRC™ User Manual